Phone: 1800 001 081 | International +61-2-4982 0855 | Fax: +61 2 4982 0566
PO Box 100 | Salamander Bay NSW 2317 | Australia | email: sales@pacsat.com.au
Masts
Many networks are constructed using masts designed for domestic TV systems. While these masts are inexpensive and readily available, they are usually not well-suited to this use as:
- Most antennas recommend a minimum mast diameter of 35-50mm to avoid antennas slipping on the mast.
- Wind loads can cause excessive mast deflection resulting in fluctuations in signal levels.
PacSat’s range of professional masts have been purpose designed for microwave networks. All masts are hot-dipped galvanised with stainless steel hardware for long service life. Braces are articulated to allow them to fit any surface slope. All masts can be fitted with between 2-4 braces depending upon the level of support required.
Medium Rigidity Masts for Class-Licensed Antennas.
| Product Code | Description | Height (Metre) | Pole DiaOD (mm) | Braces | |
| UTIN15 | General purpose braced mast for tin roofs. | 1.5 | 47 | Fixed length | Get a Quote |
| UTIN25 | General purpose braced mast for tin roofs. | 2.5 | 47 | Fixed length | Get a Quote |
| UCLP15 | General purpose braced mast for clip lock roofs. | 1.5 | 47 | Fixed length | Get a Quote |
| UCLP25 | General purpose braced mast for clip lock roofs. | 2.5 | 47 | Fixed length | Get a Quote |
High Rigidity Masts for Licensed Antennas
The high rigidity masts are designed for supporting high loads with minimum deflection as often required for licensed networks. They are hot-dipped galvanised medium steel with stainless steel hardware. The struts on the tin and cliplock masts are fully adjustable in length and are fitted with 2-axis feet for positioning on any camber of surface.
| Product Code | Description | Height (Metre) | Pole DiaOD (mm) | Braces | |
| LTIN20 | 2.0 metre solid braced mast suitable for tin or flat roofs. | 2.0 | 76 | Adjustable length | Get a Quote |
| LTIN30 | 3.0 metre mast with solid braces (middle) and guys (top) suitable for tin roofs | 3.0 | 76 | Adjustable length | Get a Quote |
| LCLP20 | Solid braced mast suitable for clip lock roofs. | 2.0 | 76 | Adjustable length | Get a Quote |
| LPPT17 | 1.7 metre mast suitable for bolting to walls | 1.7 | 76 | Nil | Get a Quote |
| LCNEXX | 2.0-6.5 metre self supported mast suitable for bolting to flat concrete structure (foundation basket and antenna stand-offs available as optional extras) | up to 6.5 | 116 | Nil | Get a Quote |