NEWS

Featured Products

High Gain 5GHz Grid Antenna

Due to customer demand for high-gain 5GHz grid antennas we have produced the GA5833 series. The antenna features aluminium grid construction with a gain of 33dBi at 5.8GHz. Models are also available for 5.4GHz.

The main features are:

High gain 5.8GHz grid antenna
33dBi
Excellent front-back ratio
Screw adjustable in azimuth and elevation
Surface-treated aluminium grid

Click here for the full Spec sheet PDF [103kB]
Click here for quote

Two Axis Mounts

Aligning antennas can be demanding, particularly when you’re dealing with high gain, 5GHz antennas with a narrow beam width. Many antenna mounting kits make granular adjustment difficult. To alleviate these issues PacSat has developed a range of mounts with screw adjustment in both azimuth (bearing) and elevation.

Main features are:

Screw adjustment in both elevation and azimuth
aluminium or galvanized steel construction depending upon size
locking mechanism once alignment is optimized
rigid support for the antenna

The Two-Axis Mounts are recommended for PacSat’s 5GHz 30dBi and 33dBi range of antennas.

This mount can be ordered as an optional extra with antennas.

Ring us on 02 4982 0855 to place order or email us at sales@pacsat.com.au

Product news

Teletronics TT5800 5.8GHz Wireless Radios

PacSat is now selling the new Teletronics 5.8GHz Wireless Radio. These units are based upon the Atheros chipset and are competitively priced.

Key features include:

802.11a operation
40mW power at 54Mbps output
Receive sensitivity: -84dBm to -70dBm
Rugged, cast aluminium weather-proof enclosure
WPA, WPA2 & 64/128 bit WEP Data Security
Web and SNMP based management
5 ultra-bright LEDs for alignment

TT5800 5.8GHz Wireless Radio

Contact PacSat Antennas for more information

New 5.8GHz Solid Parabolic Dish Range

PacSat has launched a new range of 5.8GHz solid parabolic dishes.
Solid dishes have a number of advantages over parabolic grids — particularly in high traffic environments:

Better front-to-back ratio
More uniform and narrower beam-width
More robust than panel-type equivalents.

Despite these advantages solid dishes are not frequently deployed at 2.4GHz as the size required to achieve moderate gain can create unacceptable wind-loads on masts. At 5.8GHz the size of the dishes is less of a problem.
PacSat’s range of solid parabolic dishes now includes 21dBi, 24dBi, 27dBi and 36dBi models.
The key features of the three new models are:

Precision-spun, surface-treated and painted aluminium alloy reflector
solid brass feed in fibreglass housing
stainless steel mounting hardware.
front-to-back ratio better than –40dB
24 month warranty

Model	Gain	Beam	Width	Dish Size
		Vertical	Horizontal	Diameter (mm)
S5821A	21dBi	12°	12°	320mm
S5824A	24dBi	8°	8°	420mm
S5827A	27dBi	6°	6°	520mm